HCTB / HCTT Series

Range of axial roof fans with horizontal air discharge configuration available in 2 version:

“B” models for air extract.

“A” models for air supply.

Base manufactured from galvanized sheet steel.

Cowl manufactured from spun aluminium.

The impellers for models 315 to 400 are manufactured from one piece injection moulded plastic, reinforced with chemical anchored fibreglass for additional strength.

Models 450 to 1000 incorporate separate plastic blades locked within a die cast aluminium hub.

Available, depending upon the model, with single or three phase motors in 4, 6, 8 or 4/8 poles.

All motors are IP65 (1) Class F (2) with thermal protection (3) and ball bearings greased for life.

Electrical supply:

Single phase 230V-50Hz (Capacitor located inside the wiring terminal box).

Three phase 400V-50Hz.

(See characteristics chart).

All single phase models are speed controllable by voltage except HCTB/4-560, HCTB/4-630.

All three phase models are speed controllable by Autotransformer. Except models Ø 710 to 1000. Models from Ø 800 to 1000 are speed controllable by inverter.

(1) 800 to 1000 models are IP55.

(2) Air stream temperature limits -40ºC to +70ºC (except models 800 to 1000 suitable for usage in environments up to +40ºC).

(3) 800 to 1000 models are not equipped with thermal protection.

Additional information: In three phase voltage, the motors can be operated in Y/? connection at 380-415, which allows two speed operation of the fans

On request: Fan supplied in RD positions. Fan fitted with 2-speed motor